Difference between revisions of "WCP (Windows based Control Panel)"

Revision as of 23:09, 26 November 2012

How To Login To My WCP Control Panel

1. To manage your domain, login to the WCP Control Panel, using the details below
2. URL: https://wcp.hostek.com/
3. Username:
4. Password: ** same as your cp.hostek.com password **

• You can also login to the control panel through your billing control panel https://cp.hostek.com/clientarea.php

1. Click on 'My Services' 'Click the small Green arrow on the the notepad to the right'
2. Now click the Login to Control Panel Icon

Custom URL for the WCP Control Panel

The WCP can als be accessed by wcp.your_domain.com

Setup wcp.your_domain.com as an A record for "184.175.108.65" or as a CName record for "wcp.ezhostingserver.com".

WCP White label Settings

Resellers and VPS customers can setup their logo in their Reseller control panel, however those additional features will only be avaialble when using the specific domain they configured in the reseller setttings. The reseller settings will be available using ANY url, and as mentioned within these settings the reseller "URL" can be setup and other whitelabel options making WCP the ultimate Windows Control Panel

Adding Additional Control Panel Logins

• This will allow you to set up additional control panel logins for you or for others involved in editing or managing your account. You can limit the Permissions or options available for them to manage.

1. Login to the WCP Control Panel, using the details below
2. URL: https://wcp.hostek.com/
3. Username:
4. Password: ** same as your cp.hostek.com password **
5. Click on the Control panel Logins tab, then click on the Add icon.
6. Put the "Username, Password and if you want them to have Limited Permission.
7. If you want them to have Limited Permission then check the Limited Permission box. This will load a dropdown where you can select what privlages they have to manage.
8. Once you are done click the Save icon at the bottom of the screen.
9. Once it has bee added you or they can login by going to https://wcp.hostek.com/Login.aspx and using the username and password that you set for it.

How To Add Additional Domains to Windows Unlimited Account

• This will allow you to add additional domains under your Windows Unlimited account.

1. Login to your WCP control panel. If you have more then one domian under your account you will need to go to the upper right of the screen and select the domain needed in the drop down that says "Domains".
2. Once you have selected the domain that you need to the middle right under the "Domains" section click on the "Addon Domains" icon.
3. Click "Add Domain" and enter the following information.
   • Domain Name
   • Username
   • Password
4. Click "Save"
5. Now that you have added the domain you will be able to select the domain to manage it from your domains list in your account manager.

FTP Accounts

• Adding or editing FTP accounts.

1. click on the FTP Accounts tab.
2. To edit one click on the little Pencil Icon to the left, to add one click on the Add FTP User tab.
3. If you are adding one you will set the Username:, Password: and folder then click the #Click on the Save Icon.

File Manager

• Basic File Operations, file uploading and editing now supported- Zip, GZip, and Tar Archive support.

1. Click on the File Manager icon, then the Login icon on the next screen.
2. To create files or Directory's outside the WWW root folder right click and click on the Create File or Create Directory option.
3. Click the Continue Icon to add this.
4. To add/edit files in the WWWroot click on the wwwroot file.
5. once you are in you can add, edit or delete by right clicking and clicking on the options given.

IIS Settings

• Setting up error pages, default pages, advanced settings, etc.

Custom Error pages

1. Click on IIS Settings in your WCP
2. Click the edit button next to the error page you want to change
3. Uncheck the Use System Default checkbox
4. Enter the path to your custom error page
5. Click Save

Mime Types

1. Click on IIS Settings in your WCP
2. Scroll to the bottom of the window and click Add Mime Type
3. Enter the extension for the Mime Type
4. Enter the Mime Type information
5. Click Save

• An example Mime Type is below:

Extension: .mp3
Mime Type: audio/mpeg

More information here: https://wiki.hostek.com/Mime_types

Default Docs

• Select a default document and drag it to the top position to set it as top priority
• Click Add to add a default doc
• Click the red X to delete a default doc
• Click a default doc and change the name
• For example: change "index.htm" to "index.asp"

Advanced

Recycle Application Pool

If you see a Service Unavailable message on your site, or have a general need to recycle a site's IIS Application Pool, you can do so through this section of WCP. Just navigate to the Advanced tab of WCP's IIS Settings section then click the Recycle button.

DNS Editor

Create a new DNS record

1. Click Add DNS Record button
2. Enter Name for record (If DNS record name is your domain name please leave this Name - text box blank as the control panel will automatically add your domain name)
3. Choose the Record type (A, CNAME, MX, NS, TXT, SPF, SRV)
4. Enter Data Type
5. Generally leave the TTL (Time To Live) as the default 86400
6. Click on the Save Icon.

Update DNS records

1. To update an existing DNS record click the Pencil icon next to the record you would like to update.
2. You will then be able to change the Name of the record, the Type of record, Data of the record, and Time to Live.
3. Once updated Click on the Save Icon.

SVR Record Fields

Name: _service._protocol
Type: SRV
Data: priority weight port address
TTL: 86400

Example:

Name: _sip._udp
Type: SRV
Data: 10 5 4030 sip.mydomain.com
TTL: 86400

==Sub Domains

• A sub-domain is like an extension of your domain name. For example, if your domain name were myfamily.com, a sub-domain would be in the following form: dad.myfamily.com or mom.myfamily.com etc.
• You can have a sub-domain pointed to any folder within your web site. If a visitor goes directly to that sub-domain he will be taken to that folder, not to your site's main page.

1. Click on the Sub Domains icon
2. Click "Add" sub Domain button
3. Enter sub domain name in Name text box. This will automatically populate the Folder text box to a folder with the same name as the subdomain.
4. If you wish this Subdomain to point to a different folder you can click on the folder icon and choose the directory you would like your Sub Domain to point to.
5. Click on the "Save" Icon.
6. This will create the sub domain record within your domains DNS zone,

• If the domains name servers are not pointed to us you will need to manually create this record where your domains DNS is hosted.

Domain Alias

• This will allow you to point 2 domains to the same website. How to create a Domain

1. To create a domain alias you will click on the Domain Aliases icon
2. Click Add Domain Alias button
3. Enter your Alias Name
4. Click on the "Save" Icon.

• You will need to be sure that your Domain Alias has been registered and has the name servers pointed to the name servers found beneath the Site Details icon.

Email

• Below is information on how to manage your email account within the WCP.

Email Users

• Allows you to create Email users as well as log directly into users Webmail account

1. Once you are logged into your WCP account, under the Email Section
2. Click Users icon
3. Click Add Email User button
4. Enter email user name (Example: if you need the email address "admin@domain.com" enter the user "admin")
5. Enter password for Email user (**See note below regarding password requirements)
6. Enter Display name (Usually set to the name of the person using the specific email account)
7. Choose if you would like this user to have administrator rights
8. Choose mail box size limit for this specific user
9. Click on the Save
10. NOTE Password requirements

• Minimum Length 6 Characters
• Must include Uppercase
• Must include Lowercase
• Must include Number
• Must include Special character
• Password cannot match username

Edit existing Email user

1. Once you are logged into your WCP account, under the Email Section
2. Click Users icon
3. Click pencil icon next to user to update
4. Update information
5. Click Save

Web mail

1. Once you are logged into your WCP account, under the Email Section
2. Click Login button next to user you would like access the mail for

• Web Mail Provides links to access the Webmail program as well as to access mail before domain propagation to our mail server

1. Click Web Mail icon
2. If domain is propagated and pointed to our mail server you can click the webmail link to access the SmarterMail webmail log in screen.
3. If you domain has not yet propagated to our mail server click the "Pr-Propagation Web Mail" link to access the SmarterMail webmail log in screen.

Mail Forwarding

1. Once you are logged into your WCP account, under the Email Section

• Allows you to set up an email alias.

1. Click on the Forwarding button
2. Enter Alias name
3. Enter address for email to this Alias to be forwarded to
4. Click on the Save Icon

MySQL database

• MySQL Allow you to create a MySQL database under your domain

1. Click on MySQL icon
2. To add new database click Add MySQL Database
3. Enter Database Name
4. Enter Username
5. Enter Password
6. (If you need a coldfusion DSN place check in check box and provide Coldfusion DSN name)
7. Click Save

• To create new user for existing database

1. Click MySQL icon
2. Click Add new user button
3. Enter Username
4. Enter Password
5. Place check mark in check box for each database you would like this user to have access to.
6. To update the password on existing database user.
7. Click MySQL icon
8. Click pencil icon next to Username
9. enter new password
10. Click on the Save Icon.

• To update the password on existing database user.

1. Click MySQL icon
2. Click pencil icon next to Username
3. Enter new password
4. Click on the Save Icon.

PhpMyAdmin

• Allows you to log directly into your MySQL database to manage.

1. Click on PhpMyAdmin link
2. If you are not logged directly into your MySQL database simply enter the server your database is located on (Can be found by clicking the MySQL icon) and enter your Username and Password.
3. Once logged in your Databases will be displayed on the Left, click on database name to manage that database.

MSSQL

• Allows you to create MSSQL databases and users.

1. Click MSSQL icon
2. To add a new database click Add MSSQL database
3. Enter Database Name
4. Choose database size
5. Enter or Choose existing Username
6. Enter Password
7. Choose Default Collation (Usually left as default)
8. Choose Recovery Model (Usually left as Simple as we make daily full backups of all #databases which we keep for 7 days)
9. Place a Check mark in the box for Coldfusion DataSource if ColdFusion DSN is needed.
10. Enter ColdFusion DSN name.
11. Click on the Save Icon.

• To edit an existing MSSQL database

1. Click MSSQL icon
2. Click Pencil icon next to database name to edit
3. Edit field necessary
4. Click on the Save Icon.

• To edit password for existing MSSQL user

1. Click MSSQL icon
2. Click Pencil next to user to edit
3. Update password
4. Click on the Save Icon.

• To add new MSSQL user

1. Click MSSQL icon
2. Click Add MSSQL User button
3. Enter username
4. Enter password
5. Place checkmark next to each database this users needs access to
6. Click on the Save Icon.

MSSQL Tools

• Allows you to log directly into MyLittleAdmin to manage your MSSQL database or MyLittleBackup to backup or restore your MSSQL database.

1. Click MSSQL Tools icon
2. Select database to Manage/Backup/Restore
3. Select User with access to database needed
4. Choose myLittleAdmin button to manage your MSSQL database
5. Choose myLittleBackup button to backup/restore your database

DataSources(DSN's)

• Allows to create a DSN for an existing database for your domain.

1. To create a MySQL or MSSQL DataSource
2. Click DataSources (DSN's) icon
3. Choose MySQL or MSSQL from drop down depending on the database this is connecting to
4. Click Add DSN
5. Choose DSN type Access/MySQL/MSSQL
6. Enter DSN name
7. Enter Database name DSN will be connecting to
8. Enter Server (Can by found by viewing database DSN is for)
9. Enter Username for database DSN is connecting to
10. Enter Password for database DSN is connecting to
11. Choose if it is a ColdFusion DSN
12. Choose if you need Unicode Support
13. Click on the Save Icon.

• To create an Access DataSource

1. Click DataSources (DSN's) icon
2. Choose Access from drop down menu
3. Enter DSN Name
4. Click on Folder icon to choose correct directory Access Database is located in
5. Enter Username (If one is set for your Access Database, if not this can be left blank)
6. Enter Password (If one is protecting your Database, if not this can be left blank)
7. Choose if it needs to be a ColdFusion DSN
8. Click on the Save Icon.

• To edit existing DSN

1. Click DataSources (DSN's) icon
2. Click pencil next to DSN to edit
3. Update information
4. Click on the Save Icon.